Kühn Controls

RelayGo relays offered by Kühn Controls AG

RELAYGO

COIL CIRCUIT ACCESORIES

As a relay is managed by transistors, triacs, etc…, it is required to adopt protection measures, peaks might appear in the line, motor switching, electrovalves, transformers, capacitors, etc…, on the other hand, as the coil disconnects, inverse voltage peaks appear, and they can create high pulses that are transmitted to other devices connected to the Coil line.
Normally a relay is unaffected by these pulses, but if a diode is connected in association with the coil, it must be cap- able of withstanding an inverse voltage higher than those of the incoming peaks.
RelayGO relays can be manufactured with protection circuits, decreasing or blocking coil generated pulses, as well as block line peaks.

RELAYS RM - RQ

L - Led indicator with rectifier
VAC and VDC Relay up to 250 V
1000V up to 24V
2000V from 25 to 60V
4000V from 61 to 250V
Note: LED connected in series with the coil @ 220VDC in RQ types.

Led indicator with rectifier

D - Free Wheeling diode
Dampens transients caused by the relay coil on de-energization.
2000V up to 60 VDC
4000V from 61 to 250 VDC

Free Wheeling diodeFree Wheeling diode + LED

E - Polarity and free wheeling diodes
A diode in series with the coil protects the relay from reverse connection.
1000V up to 60 VDC
4000V from 61 to 250 VDC

Polarity and free wheeling diodesPolarity and free wheeling diodes + LED

U - Bridge rectifier incorporated VDC / VAC
Available only in voltages up to 60V
Protection 1000V
Previous circuits, E, D, U, can be combined with L, LED incorporated: LE, LD, LU.

Bridge rectifier incorporated VDC / VACBridge rectifier incorporated VDC / VAC + LED

R - Resistor and Capacitor
Suppressor for AC coils. 2000V Available only in RM and RF

Resistor and Capacitor

Remanence relays

Remanence relays

Multivoltage relays
from 12 up to 240V AC/DC, 0 up to 400 Hz.

Multivoltage relays

RELAYS RF

L - Led no polarity
Bridge rectifier parallel coil ≤12 VDC / VAC
Bridge rectifier serial coil ≥12 VDC / VAC

Led no polarity > 12VLed no polarity ≤ 12V

LE - Led A+ polarity (optional)
All VDC voltages, polarity and freewheel diodes

Led A+ polarity

LU - Led no polarity only in 24 and 48 VDC (optional)
Bridge rectifier for VAC/VDC relays

Led no polarity only in 24 and 48 VDC

R - Resistor and Capacitor
Available for VAC Coils VAC pulse RC protection up to 2000 V

Resistor and Capacitor

HL - Multivoltage relays
from 24 up to 240V AC/DC, 0 up to 400 Hz.

Multivoltage relays

Product listing and cross reference:

Modules for sockets MM Interface relays RF Industrial relays RM Power relays RP  
Miniature relays RQ Railway relays RR Timer Module TM Solid state relays RS Sockets and accessories for relays

Data sheets:

Modules for sockets MM Interface relays RF Industrial relays RM Power relays RP
Miniature relays RQ Railway relays RR Timer Module TM Special relays RE

Related sites:

General information Tips and tricks Quality certificate Coding and labeling Coil circuits Applications and symbol index Equivalences

Nothing found? or you want more information about coil circuit protection of RelayGo Relays or another products, please send us a fax: +49 7082 94 00 01, or email to: Inquiry to Kühn Controls… we help you…

Kühn Controls AG, Sales office Germany, Gräfenhäuser Str. 14, 75305 Neuenbürg, Germany • Tel.: +49 7082 94 00 00 • Fax: +49 7082 94 00 01 •  Contact • Imprint, legal notice • Startsite.


This Site is created by Kühn Controls  Kühn Controls AG, all rights reserved.